Speedlite Transmitter ST-E10

HK$880.00 HK$1,180.00

Speedlite Transmitter ST-E10 is a compact 2.4GHz radio transmission wireless flash Sender for camera with Multi-Function Shoe1. It can control up to 5 groups and 15 receiver units for wireless multiple flash photography2 with a max. 30m transmission distance.

  • Power Supplied by Multi-Function Shoe allows lightweight compact design (48g)
  • “Menu” button to access Flash Function Settings Menu instantaneously on camera display
  • Wireless flash settings can be set with camera menu or Camera Connect smartphone app.
  • Dust-and water-resistant design3 equivalent to EOS-1D Series camera

Compatible Cameras: EOS R camera with Multi-Function Shoe (Incompatible with EOS R5 C / C50 / R5 / R6 / R / Ra / RP / R100 nor EOS Digital SLR camera)

Compact & Lightweight

The Speedlite Transmitter ST-E10 is designed for the Multi-Function Shoe. As power is supplied directly from the camera and settings are adjusted with camera display, ST-E10 features an ultra compact form factor and weights only 48g.   


Simple and Easy Control 

There are two LEDs and one Menu button on the back of the Speedlite Transmitter ST-E10. The LEDs indicate the connection with other Speedlites and whether the Speedlites are ready to fire.

The Menu button functions as a shortcut button to access the [Flash function setting] or [Quick flash group control]4 menu on the camera display.

Using the Camera Connect App to remotely control the flash settings are also available for greater convenience.


Radio transmission wireless flash

Speedlite Transmitter ST-E10’s 2.4GHz band radio transmission can reach up to 30m transmission range. It is not affected by environment lighting and does not require direct line-of-sight, allowing for better creative freedom and reliability.

Its radio transmission supports 15-channels with 10000 radio transmission ID to minimize interference and controls up to 5 groups and 15 receiver units2, wireless 2nd curtain sync5 is also supported.


Configurate FE Memory from Camera

With EOS R6 Mark II or later compatible cameras6, users can now enable FE memory using the camera’s Flash C.Fn settings menu with C.Fn-19: FE Memory. 
In addition, users can customize a camera button to switch the flash mode from E-TTL to Manual mode and apply FE Memory.

Configurates Flash C.Fn settings C.Fn-19: FE Memory with camera.

Customize camera button to apply FE Memory.


Dust and Water Resistant Design 

Speedlite Transmitter ST-E10 features dust and water resistant design equivalent to EOS-1D series, ensuring dust and water resistant capability3 is maintained when use with cameras featuring Multi-Function Shoe and dust and water resistant design.

 

 Speedlite Transmitter ST-E10

Type

Radio transmission wireless Speedlite transmitter

Flash exposure compensation

±3 stops in 1/3- or 1/2-stop increments

FEB

±3 stops in 1/3- or 1/2-stop increments

High-speed synchronization

Supported
* For details on cameras that support this feature, refer to the Canon website.

Second-curtain synchronization

Supported
* For details on cameras that support this feature, refer to the Canon website.

Manual flash output setting range

1/1 to 1/8192 (in 1/3-stop increments)

* For high-speed synchronization, minimum flash output is 1/128.
* The minimum flash output level depends on the flash used.

Stroboscopic (MULTI) flash setting

Flash count:1 to 100
Flash frequency: 1 to 500 Hz
Flash output setting range: 1/4 to 1/8192 (in 1/3-stop increments)

* The minimum flash output level depends on the flash used.

Communication functions

Standards compliance: IEEE802.15.4, ARIB STD-T66
Communication method: Primary modulation: OQPSK, Secondary modulation: DS-SS
Transmission frequency: 2405 to 2475 MHz
Channel: Channel 1–15 (Setting: Auto/Manual)
Wireless Radio ID: 0000 to 9999 (Setting: Manual)
Transmission distance*1*2: Approx. 30 m / 98.4 ft.
Group: Up to 5 groups (A, B, C, D, E)
Max. units for communication: Up to 16 senders and receivers in total
Max. sender units: Up to 15 (*The second and additional sender units serve as sub-senders)
Max. receiver units: Up to 15

*1: With no obstructions between sender and receiver and no radio interference from other devices.
*2: The transmission distance may be shorter depending on the placement conditions, surrounding environment, weather conditions, etc.

 

Power Source

Supplied from the camera

Dust and Water Resistance

Yes (Equivalent to EOS-1D Series)

Operating temperature

0 – 45°C

Operating humidity

85% or less

Dimensions (W x H x D)

Approx. 45.5 x 37.8 x 53.6 mm

Weight (Approx.)

48g

  • All specifications above are based on Canon's testing standards.
  • Product specifications and external appearance are subject to change without notice.

1 Compatible with EOS R camera with Multi-Function Shoe (Incompatible with EOS R5 C / C50 / R5 / R6 / R / Ra / RP / R100 nor EOS Digital SLR camera). Firmware update may be required for EOS R3 / R6 Mark II / R7 / R10.
2 Compatible Speedlite: Speedlite EL-1(Ver.2) / EL-1 / EL-5 / EL-10 / 600EX II-RT / 600EX-RT / 430EX III-RT。
3 With compatible dust-and-water-resistant EOS R series camera; however, it is not recommended for use under rain. 
4 Compatible with EOS R6 Mark II or EOS R camera with Multi-function Shoe launched after. 
5 Compatible Sender: Speedlite EL-1(Ver.2) / EL-1 / EL-5 / EL-10 / Speedlite Transmitter ST-E10 / ST-E3-RT(Ver.3) / ST-E3-RT(Ver.2). Compatible Receiver: Speedlite EL-1(Ver.2) / EL-1 / EL-5 / EL-10 / 600EX II-RT / 600EX-RT / 430EX III-RT.
6 Compatible with EOS R6 Mark II or EOS R camera with Multi-function Shoe launched after (except EOS R1 and EOS R5 Mark II). Firmware update required for EOS R6 Mark II/ R8/ R50.

To Top